The incision is sutured and the retentive caps are placed onto the transitional implants. The denture is hollowed out in the appropriate area and GC Pattern resin is used to pick up the attachments. The excess acrylic resin is trimmed from the inside of the denture and the patient is trained to inset and remove the prosthesis. 

Here's a little tip...

When you want to locate the exact position of the attachments on the inside of the denture, take a little Triad and line the denture with it. Don't cure it! Place the denture in the mouth and you will record the exact position of the implants and attachments. Mark the areas with a pencil, remove the Triad and hollow out the areas. Repeat as necessary...